Prefabricated Integral Staircase

Prefabricated integral staircase, that is, the whole part uses a fixed mold for casting molding.

Advantages: can produce many categories of products with good quality.

Prestressed concrete hollow slab (SP slab)

The prestressed concrete hollow slab has a width of 1200mm and an economic span of 8-12m.

Advantages: large span, low cost and convenient construction.

Prefabricated caisson

The surface flatness of the prefabricated caisson can be as flat as the surface of the mold or made into a groove effect. Through the change of the mold, rich and changeable shape can be realized, saving on-site mold making and expensive support.

Advantages: good waterproof and anti-seepage performance, saving on-site moulding and expensive support.

Prestressed Concrete Composite Slab (PK slab)

The prestressed laminated board has the advantages of no support or less support, and low steel consumption for some types.

Advantages: low cost, convenient construction, and can replace truss reinforced concrete laminated slabs.

Prefabricated concrete beam

The secondary casting concrete is divided into prefabricated laminated slabs and fully prefabricated beams, and different degrees of prestress are applied to reduce or even eliminate supports. Products often use C40 concrete, HRB400 grade ordinary steel bars, etc.

Advantages: custom-made precast concrete beams with different appearance qualities, and fair-faced concrete beams are free of plastering. The prestressed concrete beam has a large span and no cracks at the bottom of the beam.

Prefabricated balcony, air conditioner, bay window slab

Follow up the design requirements, and can produce prefabricated laminated balconies, air conditioners, and bay window slabs.

Advantages: can produce many categories of products with good quality.

Truss reinforced concrete laminated slab

The truss reinforced concrete composite slabs are produced using fluid concrete and assembly molds. Prefabricated composite slabs of different sizes and shapes can be produced according to project requirements.

Advantages: there are many categories of products with good quality, special-shaped slabs can be produced, and the product adaptability is high.